Article Date: 6/1/2001


Contact Lens Solutions and Lens Care Update

A rapid evolution of contact lens care has taken place during the past year. Most changes are an expansion of claims and new evidence about how previous products may be used. However, you need to understand a few new product modifications and even a few new products as well. In addition, Consulting Editor Randy McLaughlin, OD, MS, provides a comparison of lens care regimens (see Chemical Disinfection Update).

The Rub

Optimal contact lens care involves clean hands, a clean contact lens case, rubbing the lens with cleaner or a multi-purpose solution, rinsing that lens and placing it into fresh solution for storage (with or without an enzyme for added cleaning). One major change in the inevitable evolution to the dream system requiring only lens removal and placement into a clean case with fresh solution (no rub or rinse) is the recent indication for no rub for several multi-purpose solutions.

What's In a Label ­ MPS, MPDS, "No Rub Needed"

Some practitioners dismiss such labeling distinctions as marketing gimmicks. Others object to manufacturers contradicting their instruction to patients. In truth, these product descriptors mean different microbiological and cleaning efficacy tests recommended by the FDA have been passed. Such indications mean additional levels of protection have been confirmed beyond what was proven before for initial approval. Product labeling can give eyecare professionals useful information. Based on the results of these tests, manufacturers are allowed to label their products as:

See Table 1 for FDA solution status based on published product labeling.






No Rub Opti-Free Express (Alcon)   


Yes--all lens schedules

ReNu MultiPlus (B&L)   



Complete (Allergan)   


Lenses used up to 30 days

SoloCare (CIBA)   



Multi-purpose Solutions (MPS) ­ Need That Regimen

ReNu (Bausch & Lomb), SoloCare (CIBA Vision) and Opti-One (Alcon) are labeled as multi-purpose solutions. During the "Stand Alone" Test (soaking only), the solution must kill one log unit each of three test bacteria and a total of five logs among the three. The solution must also show no growth of two test fungi during the labeled soak time. When all regimen steps are followed (rub, rinse, soak), the product must kill or remove five logs of each test organism. (Hence the name "Regimen Test.") The product must also prove substantial similarity relative to cleaning and to other marketed MPS products in a clinical trial.

New RGP solution from Alcon

Multi-purpose Disinfecting Solutions (MPDS) ­ Kills with No Rub or Rinse

Opti-Free Express (Alcon) and ReNu MultiPlus (Bausch & Lomb) are the only two products that have achieved the distinction of "MPDS," and they kill with no rub or rinse. This is in vitro, however, and they are not recommended for use in this fashion. These solutions achieve a higher microbiology challenge than the multi-purpose solution in "stand alone" (soaking only) testing. If the solution passes this test, it is presumed to pass the five-log regimen test. The product must kill at least three logs of each of three test bacteria and one log of each of two test fungi during their labeled soak times without a rub or rinse step. The MPDS designation does not address cleaning efficacy differently than MPS solutions.

CIBA Vision updates peroxide care to one-bottle system.

No-Rub Required Solutions

Three products now have "No-Rub Needed" directions for use: Alcon's No-Rub Opti-Free Express MPDS, which is cleared for all lens wearing schedules, Allergan's Complete, which recently received clearance for lenses worn up to 30 days, and CIBA's new AO Sept Clear Care, also approved for no-rub for lenses used up to 30 days. For this claim, the product must demonstrate microbiology and cleaning efficacy without a rubbing step. Alcon achieved the first "no-rub required" labeling for Opti-Free Express MPDS by demonstrating certain levels of disinfecting and cleaning efficacy. In order for a contact lens care product to obtain no-rub labeling, the product must provide the following evidence:

For example, Opti-Free Express, must prove in laboratory studies that each of the three components (citrate, Tetronic 1304 surfactant and AMP-95) in the formulation provide cleaning activity such that Tetronic provides the surfactant action, Citrate removes protein from the lens during the soak and AMP-95 helps prevent protein build-up while the lens is worn, according to Alcon.

Alcon claims Opti-Free Express provides cleaner lenses, as measured objectively by High Performance Liquid Chromatography, in a clinical study than a control of a marketed solution used with a rub. The same pair of lenses was worn for 90 days. These results allowed the FDA to clear No-Rub Opti-Free Express for all lens wearing schedules.

Many practitioners appreciate the margin of safety in new approvals for products providing adequate disinfection without the rub for their non-compliant patients (most patients, most of the time). Yet some practitioners object to advertising and labeling of products which emphasize the "no rub." Many practitioners continue to instruct patients or have their staff recommend rubbing to remove lens debris. Others are less concerned with rubbing because patients should dispose their lenses on a two-week cycle. However, recent evidence suggests that compliance with lens replacement cycles is decreasing, and only 50 percent of patients actually rub their lenses. Fortunately, both Alcon and B&L have published data during the past year demonstrating antimicrobial effectiveness against Pseudomonas and other organisms for Opti-Free Express and ReNu MultiPlus, not only for the bacteria they are required to test against by FDA, but also for isolates from clinical ulcers.

New Products

Superficial but extensive corneal staining secondary to multi-purpose solution use.

Recent data reported by numerous authors has pointed to toxicity from MPS and MPDS solutions, both in vivo and in vitro. Some of these reports suggest such toxicity is not observed with AO Sept and may be prevented by some of the aforementioned protective mechanisms.

What's Next?

Contact lens care products have come a long way since the early days of heat disinfection with salt tablets. Yet, heat disinfection may be making a comeback (see when used with sterile, non-preserved saline. UV light is a good disinfectant when used with non-preserved saline in Purilens. One-bottle lens contact lens care will continue to dominate the field. Such products will be refined and optimized. The use of solutions overall has leveled off due to slow growth of daily disposable contact lenses and expected increased use of extended wear lenses. But one-bottle lens care and on-the-eye lens wear enhancers ­ improved eyedrops for contact lenses ­ will evolve and expand in use.

Dr. Barr is editor of Contact Lens Spectrum and assistant dean of Clinical Affairs at The Ohio State University College of Optometry.


Chemical Disinfection Update

In today's hydrogel contact lens practice, most patients are able to dispose of their contact lenses on a more frequent basis. Because of this increase in disposability, many patients will unintentionally neglect their proper hydrogel maintenance solutions.

There have been many changes in the method of disinfection of hydrogel lenses leading up to the new millennium. In fact, patients may not be introduced to heat disinfection in this country, for heat sterilizing units are infrequently used in the United States. Chemical disinfection has been divided into to two simplified types: all-in-one solutions and hydrogen peroxide-based systems. Peroxide systems are very effective in providing the least amount of irritation to an allergic patient, while keeping the lenses very clean. However, except for new AO Sept Clear Care, they involve several bottles and neutralizing agents that may lead to a lack of compliance.

All-in-one chemical disinfection systems are the first choice in hydrogel maintenance because they are convenient to the patient, (hopefully) promoting compliance. All systems are approved for cleaning, disinfection and wetting of hydrogel lenses. The four most popular systems are Allergan's Complete, Alcon's Opti-Free Express, Bausch & Lomb's ReNu MultiPlus and CIBA's SoloCare. Each system has evolved over the years, and a review of the manufacturers' and FDA recommendations are suggested. The following information is taken from each company's package insert.

  • Allergan Complete (preserved with PHMB and containing Poloxamer 237) recommends placing at least three drops of solution on each lens surface and rubbing each side of the lens gently for at least 10 seconds. Rinse both lens surfaces thoroughly with fresh solution to remove all debris. Next, place the lenses in a clean lens case and fill with solution until the lenses are fully covered. Allow the lenses to soak for a minimum of four hours for disinfection and protein removal. You may leave the lenses in the unopened lens case for up to 30 days.
  • Alcon Opti-Free (preserved with Aldox) requires no rubbing for lenses replaced on any schedule. Each side of the lens must be rinsed for five seconds. Lenses must be stored in fresh solution for at least six hours. Before wear, each side of the lens must be rinsed for five seconds to remove any debris on the lens. For lenses used more than 30 days, lenses must be rubbed with two drops of solution on each side for 20 seconds, rinsed thoroughly and disinfected in fresh solution for at least six hours. Lenses may be left in the unopened case for up to 30 days.
  • Bausch & Lomb ReNu MultiPlus (preserved with Dymed and contains Hydranate) requires placing three drops of solution on each side of the lens and rubbing for 20 seconds. Remove surface debris by rinsing thoroughly with solution. Place the cleaned lens in the case and soak in fresh solution for at least four hours. Lenses may be left in the unopened case for 30 days
  • CIBA SoloCare (preserved with Polyhexanide and contains Pluronic F127) requires applying three drops to each side of the lens and gently rubbing the lens for 10 seconds per lens side (20 seconds total per lens). Next, rinse the lens thoroughly with solution to remove debris, rubbing the lens gently between the thumb and forefinger. Soak the lenses for at least 10 minutes (or overnight). SoloCare is approved for hard and rigid gas permeable lenses as well.
  • CIBA AO Sept Clear Care is a one-bottle, no-rub, peroxide-based lens care solution that cleans, disinfects and removes protein. Patients place their lenses into the dome basket holder, thoroughly rinse the lenses for five seconds and place the lens holder in the lens case filled with AO Sept Clear Care. After soaking for six hours, lenses are ready to wear. No final rinse is necessary. It is approved for soft contact lenses replaced in 30 days or less.

All-in-one solutions are the care product of choice for hydrogel contact lens wearers because they are simple to use and provide outstanding cleaning and disinfection. If an irritation occurs, switch the patient to a hydrogen peroxide-based system in hopes of decreasing solution component-based irritation. Contact lens practitioners must take the time to review each patient's maintenance system at each and every yearly comprehensive examination.

­ Randy McLaughlin, OD, MS

Contact Lens Spectrum, Issue: June 2001